Running With Scissors...

  • Advertise with us
Project by deerslayer_13 posted 04-17-2014 01:56 PM 2839 views 3 times favorited 16 comments Add to Favorites Watch

Finally got to do something a little different. These are 36” ceremonial ribbon cutting scissors made from select pine. Designed in Vcarve Pro and cut on the CNC router. She is very happy with the end results.

16 comments so far

View helluvawreck's profile


32086 posts in 3379 days

#1 posted 04-17-2014 02:00 PM

Very creative and I would love to have one of those routers. Nice work.

helluvawreck aka Charles

-- helluvawreck aka Charles,

View doubleDD's profile


8661 posts in 2556 days

#2 posted 04-17-2014 02:50 PM

I have to admit, the title if funny. Nice work on the scissors.

-- Dave, Downers Grove, Il. -------- When you run out of ideas, start building your dreams.

View a1Jim's profile


117722 posts in 4090 days

#3 posted 04-17-2014 02:57 PM

A totally unique project great job.

View Woodknack's profile


12913 posts in 2893 days

#4 posted 04-17-2014 03:43 PM

It’s all fun and games until someone puts an eye out …

Nice work on the scissors.

-- Rick M,

View Thewoodman2000's profile


822 posts in 2483 days

#5 posted 04-17-2014 04:36 PM

I like this project a lot. I have access to CNC equip at my job and you sure can do some fun things with it.

Are you using a dowel to hold the 2 parts together or???

Don’t show this to the kids it will undo a lot of work trying to make them stop.

-- (the only thing in there she says is....tap on head..........tap..........tap..... saw dust) - James

View squaretree's profile


160 posts in 2084 days

#6 posted 04-17-2014 04:47 PM

That’s a sharp project. Shear beauty. Guess I’ll cut it out now

-- if you can't find me, just follow the extension cord

View oldnovice's profile


7499 posts in 3880 days

#7 posted 04-17-2014 05:08 PM

I can resist! ......
...... No I cannot resist!

Definitely a cut above!

-- "I never met a board I didn't like!"

View woodshopmike's profile


226 posts in 2176 days

#8 posted 04-17-2014 05:53 PM

This made me laugh out loud! Fun project.


View Bill's profile


404 posts in 2662 days

#9 posted 04-17-2014 07:02 PM

That would also make a great Halloween prop.

-- Putting the "mental" in experimental since 1973

View Northwest29's profile


1681 posts in 3003 days

#10 posted 04-17-2014 07:21 PM

Very cool project. Nice thing about CNC is once you do the design work you can cut the following ones out much faster. Thanks for the share.

-- Ron, Eugene, OR, "Curiosity is a terrible thing to waste."

View AaronK's profile


1508 posts in 3977 days

#11 posted 04-17-2014 07:37 PM

Where’s the money, Lebowski?


View SCOTSMAN's profile


5849 posts in 4098 days

#12 posted 04-17-2014 07:52 PM

Could you come over to Scotland my toenails need a heavy trim LOL. Alistair

-- excuse my typing as I have a form of parkinsons disease

View gsimon's profile


1313 posts in 2626 days

#13 posted 04-17-2014 11:11 PM

now now now CUT it out guys :)

-- Greg Simon

View deerslayer_13's profile


39 posts in 2872 days

#14 posted 04-18-2014 12:58 AM

Thanks for all the comments guys. It was a fun build and now I find myself needing a pair… Don’t know why or what for, but I will have some soon. They are held together with a round head bolt and a t-nut, nothing fancy just what I had in the shop.

View 489tad's profile


3653 posts in 3524 days

#15 posted 04-18-2014 01:06 PM

Wicked cool.

-- Dan, Naperville IL, I.G.N.

showing 1 through 15 of 16 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics