Hallway Mirror frame #1: In the beginning there was broken old mirror and some clear Fir wood

  • Advertise with us
Blog entry by Popeye Jr. posted 02-07-2009 08:26 PM 1104 reads 0 times favorited 1 comment Add to Favorites Watch
no previous part Part 1 of Hallway Mirror frame series Part 2: Assembley of frame »

This project started off by trying to find a mirror that I could use without paying 60 or 70 dollars. my dad came through with a large mirror that he found, it was slightly damaged on the edges and had a big break across the top. Never cutting glass before I set out searching u-tube and found a few good instructional videos. Then I went to the local hardware store and picked up a glass cutter. I did a few practise cuts on some old glass that i had lying around and vwala. It’s fairly easy to do, I even did a few arched cuts that snapped of perfect. Then I set to work on trimming the Mirror.

Next i have selected some nice clear Fir For this Frame project. Now I must get back to work.

And a big Thanks to Greg Wurst for plans on this project. It saved me alot of time.

-- People who say it cannot be done should not interup those who are doing it

1 comment so far

View Popeye Jr.'s profile

Popeye Jr.

120 posts in 3967 days

#1 posted 02-07-2009 08:35 PM

Finally! I got the picture uploading thing down. What a chore it was. For some reason my computer was adding info to the direct link address when I posted the picture? I got it now though.

-- People who say it cannot be done should not interup those who are doing it

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics