LumberJocks

Preventing Blotching Using A Wash Coat

  • Advertise with us
Blog series by pjones46 updated 01-06-2015 04:15 AM 2 parts 12474 reads 3 comments total

Part 1: Finishing with Wash Coats

01-04-2015 03:10 AM by pjones46 | 2 comments »

Wash Coat #1: Finishing with Wash Coats I am starting to put together an article covering finishing and this will be part of the coverage but not just limited to preventing blotching as a wash coat will aid in a more consistent staining color. This will be updated as my thoughts are organized. This is only a small portion: A wash coat is a coat of thinned finish that’s applied to bare wood to partially seal the surface before a stain is applied. It reduces the amount of stain from so...

Read this entry »


Part 2: Waterbourne Finish Coatings

01-06-2015 04:15 AM by pjones46 | 1 comment »

Wash Coat #2: Waterborne Finish Coatings As previously mentioned in Preventing Blotching Using A Wash Coat #1, most any standard finish can be used as a wash coat. These are Lacquer (both waterborne and solvent type/nitrocellulose), polyurethane (both waterborne and oil based), Oil-based Varnish, and Shellac. The above being said, lets talk Waterbourne. It really makes no difference which you use waterborne lacquer, waterborne shellac or waterborne polyurethane since they all are simply...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com