LumberJocks

Stickley #603 Tabouret Table

  • Advertise with us
Blog series by pintodeluxe updated 02-03-2015 01:05 AM 2 parts 7271 reads 19 comments total

Part 1: Half Lap and Lapped Dovetail Joints

10-20-2014 06:36 PM by pintodeluxe | 10 comments »

This little Stickley table has fascinated me for years, but it was never the top project on my list. I think anyone interested in building arts and crafts furniture should build these two projetcs: a Morris chair, and this little tabouret table. That way you have a place to rest and a place to set your drink. The 603 is more complicated than it looks, with offset half lap joinery and dovetails too. I actually can’t imagine designing a project that required the joinery to come togeth...

Read this entry »


Part 2: Cutting Top and Glueup

02-03-2015 01:05 AM by pintodeluxe | 9 comments »

The dry assembly looked good, so I chamfered the ends of the through tenons, and glued up the table. -----Lapped dovetails secure the top stretchers. -----The half-lap joints and the lapped dovetails all came out flush.-----Then I cut the tops with a circle cutting jig and plunge router. I used a 1/4” spiral bit and cut the top free in multiple passes. -----The 1” thick top came out nice, with minimal sanding at the oscillating belt sander. I eased the edges with a 1/8”...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com