LumberJocks

A case for spraying finishes

  • Advertise with us
Blog series by pintodeluxe updated 03-16-2021 04:54 PM 2 parts 7230 reads 2 comments total

Part 1: Spraying Finishes, Lacquer and Gravity Feed HVLP

12-13-2010 10:24 AM by pintodeluxe | 2 comments »

https://s3.amazonaws.com/vs-lumberjocks.com/ldcxy83.jpg https://s3.amazonaws.com/vs-lumberjocks.com/ldcxwt7.jpg1. You will use much less material because the transfer efficiency is higher. 2. Less noxious overspray.3. Better finish with no orange peel. Actually it is glass smooth, and seems almost automatic to get perfect results. 4. If you accidentally run the cup out of finish, it just quietly stops spraying. Compare this to the sputtering mess created by a siphon gun. 5. Two...

Read this entry »


Part 2: Fuji LX-20 HVLP Gravity Feed Gun

03-16-2021 04:54 PM by pintodeluxe | 0 comments »

How has this gun been hidden from the woodworking industry so well? It’s marketed to the auto industry, where it’s apparently a hit, but I couldn’t find a single mention about the LX-20 on woodworking forums. I use it with satin lacquer for topcoating my furniture projects, and the finish it delivers is incredible. The atomization is so fine, you don’t need to touch the second coat at all. I used to wet sand my topcoat for a smooth finish, but since switching to th...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com