Laguna 1412 Bandsaw Mods and Musings

  • Advertise with us
Blog series by pintodeluxe updated 12-08-2020 06:03 PM 3 parts 7980 reads 31 comments total

Part 1: Custom Everyday Fence

12-01-2020 12:22 AM by pintodeluxe | 15 comments »

YouTube on Laguna 1412 Mods I love the re-saw fence on the Laguna 1412 bandsaw, but I didn’t use it in flat mode much. It tends to take a lot of table space, and is actually a little lower than I like. So I made an “Everyday” fence that is 2-1/4” tall, and it works great for notching, joinery work, and most routine bandsaw cuts that require a fence. I wanted to be able to switch back and forth between the t...

Read this entry »

Part 2: Dust Collection Mods

12-07-2020 04:12 AM by pintodeluxe | 13 comments »

YouTube 1412 Bandsaw Mods So I have been enjoying my Laguna 1412 bandsaw, and tinkering with a few useful modifications. The stock dust collection on the 1412 is really fairly good compared to other stock saws. It has one 4” dust port in the lower cabinet. It cleans a lot of the dust away, but there is still a good sprinkling on the outside of the saw with extended use. I have a three-pronged attack to improve dust collectio...

Read this entry »

Part 3: Custom Outfeed Table (For the Bandsaw!)

12-08-2020 06:03 PM by pintodeluxe | 3 comments »

YouTube 1412 Mods I’ve been loving the Laguna 1412 bandsaw, which has quite a few nice features. The cast iron table has ample width, but only offers about 8” of outfeed support. I like about double that, so I can make most routine cuts without breaking out the outfeed rollers. So I decided to whip up a custom outfeed table to finish off the bandsaw mods. ------Laminate some MDF together to form the table. I pla...

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics