LumberJocks

Laguna Resaw King Giveaway

  • Advertise with us
Blog entry by pintodeluxe posted 04-23-2021 05:17 PM 967 reads 0 times favorited 10 comments Add to Favorites Watch

Laguna is doing a Resaw King bandsaw blade giveaway. These are the carbide tipped ones, so get your entry in!

Entry page… https://lagunatools.com/giveaway/

YouTube video of the Resaw King in action on a 1412 bandsaw… https://youtu.be/lCCbmAoNyaY

Good luck!

-- Willie, Washington "If You Choose Not To Decide, You Still Have Made a Choice" - Rush



10 comments so far

View WhattheChuck's profile

WhattheChuck

455 posts in 4644 days


#1 posted 04-23-2021 05:25 PM

Nice video, Willie! I wonder if I can use a Resaw King on my 1946 Delta Rockwell saw. I use 1/2” blades all the time.

Chuck

-- Chuck, Pullman, WA

View pintodeluxe's profile

pintodeluxe

6378 posts in 3897 days


#2 posted 04-23-2021 05:53 PM

Hmmm, I guess it depends how well the guides can support wider blades. Other than that, the Resaw King comes in various lengths, and you can run them on most any bandsaw.

Thanks

-- Willie, Washington "If You Choose Not To Decide, You Still Have Made a Choice" - Rush

View Andybb's profile

Andybb

3279 posts in 1687 days


#3 posted 04-23-2021 09:38 PM

Registered. Thanks.

I already have 2. My Laguna 1412 and a Resaw King resaws like butter, even Bubinga, Cocobolo etc.

-- Andy - Seattle USA

View pintodeluxe's profile

pintodeluxe

6378 posts in 3897 days


#4 posted 04-23-2021 09:56 PM

It is amazing that the 1412 is a 120v saw. It cuts like a much bigger machine, especially with the Resaw King.

Thanks Andy.

-- Willie, Washington "If You Choose Not To Decide, You Still Have Made a Choice" - Rush

View Andybb's profile

Andybb

3279 posts in 1687 days


#5 posted 04-24-2021 04:34 AM

I didn’t buy 2. I’m 2 frugal for that. I bought one when I bought the saw and I ordered a part from them for something else and the guy accidentally charged my card $541 for a $5.41 part. He called back in about ten minutes when he realized it and shipped me a free blade of my choice. Naturally I picked the R King. He also liked the review I posted on YouTube and sent me an a 1/4” blade too.

Ive said it before but I love that saw. Zero drift right out of the box 4 years ago and still is. It’d be nice to have the one with the brake but it’s only a little annoying.

-- Andy - Seattle USA

View pintodeluxe's profile

pintodeluxe

6378 posts in 3897 days


#6 posted 04-24-2021 05:09 AM



I didn’t buy 2. I’m 2 frugal for that. I bought one when I bought the saw and I ordered a part from them for something else and the guy accidentally charged my card $541 for a $5.41 part. He called back in about ten minutes when he realized it and shipped me a free blade of my choice. Naturally I picked the R King. He also liked the review I posted on YouTube and sent me an a 1/4” blade too.

Ive said it before but I love that saw. Zero drift right out of the box 4 years ago and still is. It’d be nice to have the one with the brake but it’s only a little annoying.

- Andybb

Nice!!!!

-- Willie, Washington "If You Choose Not To Decide, You Still Have Made a Choice" - Rush

View James E McIntyre's profile

James E McIntyre

1268 posts in 2376 days


#7 posted 04-25-2021 03:57 PM

Thanks for the tip and great video.
I entered to win. My band saw is a Grizzly 14” w/12” riser.

I think the Resaw King only comes in 3/4” widths.

I put a 3/4” blade on my Grizzly and it didn’t seem to get enough tension. Maybe it was me. I just bought it and was unfamiliar with it.

I called Grizzly and the tech recommended 1/2” as the widest place on that model.

But if I win, I will try again.

-- James E McIntyre

View Andybb's profile

Andybb

3279 posts in 1687 days


#8 posted 04-26-2021 01:13 AM

@pintodeluxe Excellent videos. Already started on the dust collection setup and the outfeed table is brilliant. Best idea I’ve seen so far. Just what the doctor ordered.

-- Andy - Seattle USA

View pintodeluxe's profile

pintodeluxe

6378 posts in 3897 days


#9 posted 04-26-2021 02:29 AM


@pintodeluxe Excellent videos. Already started on the dust collection setup and the outfeed table is brilliant. Best idea I ve seen so far. Just what the doctor ordered.

- Andybb

Hey that’s great Andy! Good luck finishing up the mods on your bandsaw.

-- Willie, Washington "If You Choose Not To Decide, You Still Have Made a Choice" - Rush

View Andybb's profile

Andybb

3279 posts in 1687 days


#10 posted 05-02-2021 02:27 AM

Well, are any of the winners lj members??

Congratulations To Our Giveaway Winners!
Robery Livolsi
Dave Lamaison
Lymond Hardy
Scott Killingsworth
Terrell Wilson
Mike Samford
Howard Johnson
Mark Norman
Charles Mossey
Jerry Gillissen

-- Andy - Seattle USA

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com