LumberJocks

phtools's Woodworking Reviews

  • Advertise with us
View phtools's:homeworkshopprojects (0)blog (0)reviews (7)forum topics (0)buddies (0)favorites (0)activity logWatch
Dewalt D55140 oil-free compressor

Dewalt D55140 oil-free compressor

04-16-2011 02:06 PM by phtools | 9 comments »

This compressor is fairly powerful, when it works… if you’ll notice, a lot of people have problems with this unit quitting working after a certain amount of time, and here’s the reason and the fix for those who are at all curious… There’s something wrong with the way this unit draws power, which causes a short in the circuit board. The board gets overloaded if you leave it on, and the fuse blows. No fuse means the unit stops working completely. You can replace...

Read this review »


Makita MAC5200 3 HP Air compressor

Makita MAC5200 3 HP Air compressor

04-16-2011 01:02 PM by phtools | 7 comments »

I purchased this compressor as a replacement for a 26Gal 5HP husky I had. There was nothing wrong with the Husky it was simply that my space could not accommodate it. I intended to use this as a homeowner who always has a project and as someone who uses compressed air for multiple purposes. I did alot of research and narrowed it down to either the MAC5200 or the DeWalt D55146. I decided on the Makita because of the lower price and the oil lubricated pump. The reason oil lubrication was import...

Read this review »


Makita MAC700 2 HP Air Compressor

Makita MAC700 2 HP Air Compressor

04-16-2011 12:43 PM by phtools | 11 comments »

First of all, this is a good product overall. If you are going to buy one, or just have, you might benefit from the following setup tips: 1. The oil filler cap is a single piece, consisting of the cap and attached tube. It may look like you can separate the cap from the tube, but don’t bother to try. Simply screw the whole piece into the threaded oil filler opening. No need to tighten too hard. Finger tight plus a bit more will be more than sufficient. You will not need to remove thi...

Read this review »


Makita BHP454

Makita BHP454

02-27-2011 01:51 AM by phtools | 4 comments »

This has to be the best hammer/drill/driver that i’ve ever used. It’s power/weight combo is perfect. I could use this drill all day without being fatigued and the battery would keep on going. Drilling 1 1/4” holes with speedbore max bits does not pose a problem for this drill. It eats through lumber with ease. This drill easily drills in 3/16” holes in concrete (just as fast as our corded hammer drill) to drive in anchors and it doesn’t take much to drill u...

Read this review »


Dewalt DCD760KL

Dewalt DCD760KL

02-27-2011 01:26 AM by phtools | 2 comments »

Our crews use a lot of different makes of cordless drills and when they need one from the shop they used to grab one of the Makitas but now their first choice is the DeWalt DCD970 drill. The DeWalt deliver a lot more power over a longer period of time. Part of this is their having the biggest (and heaviest) lithium ion battery and part of it is the 3 speed gearbox. We use the Hole Pro adjustable hole cutters a lot and the low speed setting is perfect for good cutting speed and having enoug...

Read this review »


Senco pc1010 air compressor

Senco pc1010 air compressor

02-25-2011 09:17 AM by phtools | 10 comments »

OK, a little play on words there, but the truth is that this small compressor is great.Know what you are buying, and then rate it from that point of view. I’ve seen people here say that this Senco is too small, lacks enough reserve air so it doesn’t keep starting to recycle, and all sorts of other comments which show they have no idea of what they are talking about. You don’t buy a Prius, or a Smart Car, to use as a tow truck, and you don’t buy a small compressor like ...

Read this review »


Dewalt DCD970KL review

Dewalt DCD970KL review

02-14-2011 05:00 PM by phtools | 5 comments »

I bought this drill to replace my Dewalt DC925, which fell off a roof and landed in a big nasty mud hole, I just figured the drill was toast and ordered a new one, saved the 925 for salvageable parts. The DCD950 and the DCD970 are the EXACT same drill except the clutch ring, which is black on the 950 and silver on the 970. The difference is the batteries that are included 950 has the XRPs and 970 has the new NANO’s(lithium-ion). OK, back to the comparison Pros of the DCD970/950 VS. the ...

Read this review »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com