Inlay card table refurbish #5: Teak oil application

  • Advertise with us
Blog entry by peterrum posted 12-19-2015 02:48 PM 1031 reads 0 times favorited 1 comment Add to Favorites Watch
« Part 4: All sanded Part 5 of Inlay card table refurbish series Part 6: Final Chapter »

I have now applied two coats of teak oil to the table to seal it up a bit and hopefully this will help to reduce the amount of air bubbles that can show up during the epoxy application. I am still researching which bar top epoxy to use so it may be a while before my next post. I will probably have to get it mail ordered in after the Christmas season. At any rate, here is a photo. I like the way the teak oil has popped the different colours of the wood.

-- Carpe Diem

1 comment so far

View BurlyBob's profile


6907 posts in 2871 days

#1 posted 12-19-2015 02:53 PM

Well Done. That is a beautiful piece of work.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics