LumberJocks

3 pc.bookcase cabinet series #8: Poly on 3 base units in 110 temps in AZ

  • Advertise with us
Blog entry by oldguy2 posted 07-30-2020 12:50 PM 225 reads 0 times favorited 0 comments Add to Favorites Watch
« Part 7: Kreg hole jig 180 mistakes or mine??? Assemble the upper case Part 8 of 3 pc.bookcase cabinet series series Part 9: It a big bookcase...getting there »

And its time to race to put a finish on 3 large base units as quick and well as I can. Each is 16×30 x 30 and a shelf same size. So this stacking …an accidental learning …let me apply the lower level then the middle . Next the outer sides. Check it. Swap the units by lifting the underside of the shelf and those top rails and do the next. Last night about 45 minutes to do all 3 and clean up the poly and brush. I miss the oil base poly but this may be one time where the water base is good for getting more coats on in short time. Today will be a coat this morning after a light rub then another at noon. the fan is moving air and the garage is dust free. These are so dry and warm after a month on my back porch and covered, they were warm to put the finish on last night here at 7 pm. Its what we have here. Good or bad. I have one face frame ready and the parts for 2 cut. The upper shelf units are cut and stained and poly coated. As are the shelves, so assembly indoors could be near and feeling better. Then ready to make doors for these after some space in my shop …its been a little crowded in there. Also soon a small project for the grandson will be posted that I needed to create and very pleased with it but more delay on these cabinets. Thanks. Hal



0 comments so far

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com