LumberJocks

Grandsons in the workshop:: Continued.. #19: Father's Day and Grandson

  • Advertise with us
Blog entry by oldguy2 posted 06-16-2020 12:23 AM 609 reads 0 times favorited 4 comments Add to Favorites Watch
« Part 18: Grandson Picture frame project done Part 19 of Grandsons in the workshop:: Continued.. series no next part

Yes This is an easy one. A watch Stand. Wow is my grandson picky about sanding. I should take the credit but I did not oversell the sanding. I did ask him on this and the mothers day picture frame to touch and check were they smooth. Not all 8 years old give a 7*^% about how smooth the wood feels, he does. He had to choose stain or clear finish. He chose clear. Now the watches should lay across the top board or slip around the bar. So it took 3 15 minute sessions in my small hot shed shop and ready to wrap and sign his name on the bottom. I think his Dad will be pleased. The boy did measuring, marking with the square, clamp with the vise, and cut with the back saw with help ( first time ). And sanding with one or more sand pads I have. I hope I gave readers some ideas. Thanks. Hal



4 comments so far

View robscastle's profile

robscastle

8267 posts in 3447 days


#1 posted 06-17-2020 09:33 PM

Always good for a look in even if nothing else I get a smile out of your adventures.

-- Regards Rob

View 489tad's profile

489tad

4060 posts in 4254 days


#2 posted 06-19-2020 11:22 PM

Fun stuff when the spark ignites. Great job!

-- Dan, Naperville IL, I.G.N.

View theoldfart's profile

theoldfart

12866 posts in 3694 days


#3 posted 06-20-2020 12:29 AM

old Guy, he’s a keeper. Good attitude. Hell of a grandpa too!

-- "With every tool obtained, there is another that is needed" DonW ( Kevin )

View oldguy2's profile

oldguy2

330 posts in 2671 days


#4 posted 06-22-2020 02:32 PM

On Fathers Day his Dad was pleased with the little project and pleased also when I told him what parts in the project the boy got to do. For 8 those were appropriate tasks. measure, check and sand, describe what he wants, draw with a square, slowly with help cut the board with a backsaw , the board in a vise. he chose not to stain it I think that would be my job but I had him sign under the base and it came out nice also. Thanks

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com