Art Deco TV Table #17: Straighten Out Those Ribbies
Apologies for the time gap. I had to find my pictures. I was happy with the way the ribs turned out on this piece. Specifically how parallel each of them were and the fit of the miters. I used bending plywood to form a spacer for the curved drawer handles or ribs as I call them, and straight spacer boards ripped to the same width for the sides and backs. The front ribs were form fitted with a nice tight fit so are only glued while the sides and backs were supported with domino tenons. The back ribs also covered up the pocket hole screws that were used to connect the back to the sides. Since the white case is holly veneer I finished the sapele ribs with the stain & tint mix co...