mzimmers's Forum Topics

  • Advertise with us
View mzimmers's:homeworkshopprojects (1)blog (0)reviews (1)forum topics (44)buddies (0)favorites (0)activity logWatch
07-28-2014 03:34 PM

(update) opinions on used Unisaw - 49 replies The seller says it’s in good shape; my primary concern is the lack of a riving blade (evidently this unit pre-dates that addition). Anyway, I’m curious as to what people think of this deal…thanks. UPDATE: based on feedback, I passed on the one above. Found a newer (200...

07-19-2014 01:46 AM

Do I really need a jointer for this...? - 31 replies

Hi, all - I was getting ready to start on a small gift box, when I noticed the stock for the sides was slightly bowed (maybe 1/16” over a 2’ board). For most projects, I’d probably ignore it, but I was planning on miter joints, and from experience, I know that ANY imperfection in the stock will show in the joints. So̷...

06-08-2014 01:40 AM

how would you make *this* cut? - 9 replies

I’ve asked a lot of these “how would you” questions here, and LJ has yet to fail me. This time I want to create the cut in the end of a 2×4 so that I can insert another 2×4 into the end of it. Since I can’t draw a picture, I’ll describe what wood is to be removed: a 1.5×1.5×3.5 bar from the mi...

06-01-2014 01:43 PM

best kind of saw for... - 21 replies

...cutting very small pieces of hardwood? I make some spline boxes (I’m sure many of you have seen the plans online) that call for little triangular pieces about 1/8” thick. I can create the triangle profile fairly easily on my table saw, but…what would make it easier to knock out the 1/8” cuts? Band saw? Scroll saw? S...

04-22-2014 06:15 PM

fittings/hoses for dust collection? - 7 replies

Hi, all - Does anyone know of a good source for fittings for a dust collection system? I have a planer, a miter saw and a table saw that all need different size hose adapters. I’d like to get some kind of universal system where i put similar-sized fittings on everything, so I can just connect up my dust collector hose from tool to tool....

02-07-2014 07:57 PM

joining edges of an octagon? - 9 replies

Hi, all - I did a search, and found some threads related to this, but nothing quite what I was looking for. I want to build an octagon from 2×6 boards. I want the boards up on edge (so the octagon, lying down, would be 5.5” high). It doesn’t need to be super strong, but I’d like to improve upon just gluing miter joints....

10-24-2013 02:47 AM

change of location (finally!) - 7 replies

Hi, all - Well, it’s official. In another couple of months, I pull up stakes and leave the once-great state of California, my home since birth, to move to the now-great state of Idaho. I haven’t found a new home yet, but rest assured, it will have at MINIMUM a three-car garage, a workshop, or a site where I can build a workshop...

08-01-2013 05:27 PM

mentally designing some garage storage... - 5 replies

Hi, all - I’m planning to build a cabinet for garage storage. It will be 6’ tall x 4’ wide x 14-16” deep, and have maybe four shelves. Intended material is 3/4” plywood. I’d like to put some doors on at least part of the cabinet. (I’m thinking about leaving the bottom shelf open, for oversized stuf...

07-21-2013 06:54 PM

dust collectors: needed power? - 16 replies

Hi - I’m sure this question has been bandied about ad nauseum, but I have to ask: how much dust collector do I need? I was looking at the PC400AP at Lowes. I hear people saying to avoid the 1 HP units, and I will do that if necessary, but…here is my situation: 1. never using more than one tool at a time (unless you count the du...

01-01-2013 07:35 PM

any tricks for miter cuts? - 22 replies

I’m building a small box with miter cuts for the edges. I need to get the dimensions really exact on this one. The first cut is easy, of course, but the second cut (on the other end of the wood) is more problematic. I’d like to put a stop block on the miter saw, but I’m concerned about how effective this would be with a board t...

12-30-2012 11:53 PM

personalizing your work? - 5 replies

I’m making a small item for a friend, and in anticipation of doing other projects for friends and family, I’m thinking I’d like to leave my initials somewhere on my work. I’d like to hear if/how others do this. Whatever I do, it needs to be something small, simple and not time-consuming (no ivory inlays here). What doe...

12-16-2012 04:48 PM

frame for sliding cabinet doors? - 8 replies

Hi, all - I’m getting ready to build some cabinets for the garage. Nothing fancy; just a 6’x4’ plywood box with a bunch of shelves. But, as tight as space is, I was thinking of going with sliding doors instead of swingers. So…good idea/bad idea/other? I was envisioning building a frame, possibly out of 2×4, to ...

11-17-2012 02:18 AM

hanging doors...any tips? - 14 replies

I probably should have asked this before I started, but…I just put a door on a cabinet, and despite my best efforts, it hangs about 1/8” low on the unhinged side. (The door is about 24”x24”.) Can this be recovered, or is it yet another learning experience? I was even thinking of removing the hinges, putting dowels into...

10-27-2012 02:39 AM

source for high quality cabinet hardware? - 12 replies

Hi, all - I am building a short, wide cabinet and it’s time to think about hardware: door hinges, a center latch, stops (if necessary), etc. I want to get some hardware that is high quality. I don’t want ornate, but I do want decorative, as this cabinet is going to go in my entry. So far, my web searches haven’t revealed ...

07-04-2012 12:57 AM

Not sure how to approach this project - 16 replies

Hi, all - I have a rather unusual project that is going to be tricky to describe. Imagine that you have a smallish block of wood (say, 6” by 12” by 1”). You wish to cut a relief into one face of the wood that is 1/2” deep and 4” by 10”, leaving a 1” border on all four sides. I’ve heard of usi...

01-19-2012 05:36 AM

what tool would you use for cutting slots? - 8 replies

Hi, all - I want to cut some slots in the sliding lids of cigar boxes. The wood is soft (probably cedar) and less than 1/4” thick. What would you use for cutting nice, clean slots in it? The slots will need to be about 1” by 3” or so. Thanks.

11-06-2011 08:59 PM

wood treatment for damp particle board - 11 replies

Hi, all - I realize this isn’t exactly a woodworking question (though it may become one!), but I thought I’d ask the braintrust here. The subfloor under my kitchen sink has had some moisture on it for a sustained period. (The shelf above it, which I’ve torn out, allowed some sink leaks to pass through.) The particle board...

09-07-2011 02:29 AM

aligning my miter saw fence/stop - 12 replies

Hi, all - I’ve got an issue right now that’s driving me nuts. I cannot for the life of me properly adjust the fence (or what the manufacturer calls the “stop” for my miter saw. The saw is a Bosch 4212L. Here’s a pic of the part in question (p/n 26): It’s held down to the saw by 4 bolts. When the bolts...

08-23-2011 11:32 PM

where to buy very small amounts of exotic wood? - 28 replies

Hi, all – I’m contemplating a small project that will need a piece of some kind of exotic wood (haven’t decided yet) that is about 1”x6”x12”. My google searches haven’t turned up a single source for wood in this size. Can someone point me in the right direction? Thanks. mz

02-21-2011 04:38 AM

best way to use a router table for board ends? - 11 replies

Hi, all - I just invested in a router table. One of the things I’d like to do is use it for cutting profiles into the ends of boards (such as for glue joints). What’s the best way to do this? Miter gauge and some clamps to hold the workpiece to the clamp? Thanks for any suggestions.

« prev 1 2 3 next »
44 topics

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics