Matt Przybylski's Blog

  • Advertise with us
This blog is written by Matt Przybylski | 1 entry so far

Latest Entry

Finishing, oh finishing, how I loathe thee...

04-07-2013 02:08 AM by Matt Przybylski | 1 comment »

As if I didn’t hate sanding enough, I’m starting to really loathe finishing. I’m making three baby gates for my little girl and there is a lot of spindles involved. Needless to say I am having a nightmare with the finishing process. I first tried spraying them but was getting too many runs as I don’t think my gun was dialed in properly and overspray everywhere because the spindles are pretty thin. I then sanded most of that down to lose the runs and primed it (I didn’t do it in the first place, probably should have) by using a foam brush (wanted to try it out and see if it helped). The foam brushes were ok but at times parts of the foam would break off and ...

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics