LumberJocks

Quick Tips

  • Advertise with us
Blog series by Matthew Morris updated 07-06-2015 05:53 PM 6 parts 9965 reads 15 comments total

Part 1: Using Both Sides of a Bit at a Router Table

06-19-2015 05:43 PM by Matthew Morris | 4 comments »

Did you know you could use both sides of a bit at the router table? In this quick tip I show you how. Watch this on YouTube here: https://youtu.be/ZFRw-4V_qNY Want to know more?Visit the website http://www.mmwoodstudio.comFollow the shop on Instagram http://instagram.com/mmwoodstudioLike us on Facebook http://facebook.com/mmwoodstudioSubscribe to my YouTube Channel: http://www.youtube.com/mmwoodstudio

Read this entry »


Part 2: Cleaning Your Bits and Blades

06-20-2015 06:43 PM by Matthew Morris | 0 comments »

To watch on YouTube go here: https://www.youtube.com/watch?v=5qHN-4Y0LXI In this quick tip, I talk about keeping your bits and blades clean to help prolong their life and continue to give you clean and crisp results. Want to know more?Follow the shop on Instagram http://instagram.com/mmwoodstudioLike us on Facebook http://facebook.com/mmwoodstudioVisit the website http://www.mmwoodstudio.com

Read this entry »


Part 3: Cutting Curves With A Wide Bandsaw Blade

06-20-2015 06:49 PM by Matthew Morris | 3 comments »

Watch this video on YouTube: https://youtu.be/1X19KMDSYqQ Sometimes I find my Bandsaw Blade is too wide to cut the curve on my piece. In this quick tip I show you a way to get around this problem. Want to know more?Follow the shop on Instagram http://instagram.com/mmwoodstudioLike us on Facebook http://facebook.com/mmwoodstudioVisit the website http://www.mmwoodstudio.com

Read this entry »


Part 4: Sharpen Often & Sharpening a Spokeshave Blade Freehand

07-06-2015 05:50 PM by Matthew Morris | 0 comments »

View on YouTube When you are using hand tools like a chisel or a plane, I like to sharpen the blade often. I will even sharpen multiples times during a day if I am using that tool a lot. After talking about this, I show you how I freehand sharpen a spokeshave blade. Want to know more?Visit the website http://www.mmwoodstudio.com/Follow the shop on Instagram http://instagram.com/mmwoodstudioLike us on Facebook http://facebook.com/mmwoodstudioSubscribe to my YouTube Channel: http://www.you...

Read this entry »


Part 5: Setting Your Table Saw Blades Angle

07-06-2015 05:51 PM by Matthew Morris | 6 comments »

View on YouTube In this video I take an excerpt from the Gamble House Rocking Chair video and show you how I set the angle of the blade on my table saw. Starrett Feeler Gage I own: http://amzn.to/1eibEBF Want to know more?Visit the website http://www.mmwoodstudio.com/Follow the shop on Instagram http://instagram.com/mmwoodstudioLike us on Facebook http://facebook.com/mmwoodstudioSubscribe to my YouTube Channel: http://www.youtube.com/mmwoodstudio

Read this entry »


Part 6: Sanding Smooth Curves

07-06-2015 05:53 PM by Matthew Morris | 2 comments »

View on YouTube In this quick tip I talk about using a foam backing pad with your random orbital sander on curved parts. The pad follows the contours of the piece and prevents flat spots from occurring. Mirka Interface Sanding Pad: http://amzn.to/1dG5A5f Want to know more?Visit the website http://www.mmwoodstudio.com/Follow the shop on Instagram http://instagram.com/mmwoodstudioLike us on Facebook http://facebook.com/mmwoodstudioSubscribe to my YouTube Channel: http://www.youtube.com/...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com