LumberJocks

Arts and Crafts Dining Table and Chairs

  • Advertise with us
Blog series by Marshall updated 01-03-2015 04:49 AM 2 parts 7003 reads 9 comments total

Part 1: Design and Table Top Glue-up

12-15-2014 05:02 PM by Marshall | 8 comments »

I’ve been planning this project for quite some time. I actually started building reproduction Gustav Stickley Spindle chairs about three years ago. Other projects and a move got in the way, and they’ve been sitting disassembled in my closet for quite a while now. I decided to start the dining room project back up recently but to start with the table. Once the table is complete, I’ll at least have a usable dining table that I can scrounge chairs up to use with while I ...

Read this entry »


Part 2: Flattening the Table Top

01-03-2015 04:49 AM by Marshall | 1 comment »

A question was asked in part 1 of this series on how to flatten the top… I started replying in the comment thread, but decided to just make it part 2. I’m investigating building a dining table myself. What is involved in “flattening” the table top? Any special tools or large equipment required? I ve seen people use parallel rails and a router sled for rounds and slabs, I suppose that might work? As with most woodworking tasks, there are multiple ways to accomplish...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com