| This blog is written by mawilsonWCR | 12 entries so far |
-
Shop Jigs #1: Table Saw Tenoning Jig
Just what the world needs, right? Well, the joinery on the outfeed table calls for some lap joint...
-
WIP: Shop Project #7: Let There Be Light
He said, “Let there be light.” And there was light. And it was good. It took forev...
-
Shop Furniture #4: Outfeed Table - Design, Take Two
Looking back at the outfeed table design, I see that it’s way over-engineered. 2×6 fra...
-
WIP: Shop Project #6: Interior Walls
The revised plan for the shop walls calls for hat channel applied like girts to the building upri...
-
WIP: Shop Project #5: I drank the Kool-Aid, Part 2
I don’t know what the trucking company did with the boxes, but they were in horrible shape....
-
Shop Furniture #3: Drill Press Stand - Design
I’m employing an almost-everything-on-wheels strategy in my shop. About the only thing not ...
-
WIP: Shop Project #4: I drank the Kool-Aid
Like most folks contemplating a new shop, I’ve spent a lot of time studying the tools that ...
-
WIP: Shop Project #3: We have Doors
The roll up doors have finally been installed. Next up is electrical. This is the plan to dat...
-
WIP: Shop Project #2: The Journey Continues
The materials and installation crew showed up early on the 21st. Work begins: First day was sh...
-
Shop Furniture #2: Outfeed Table - Design
In 40 years of writing code, I’ve applied the practice of “build one to throw it away...
-
Shop Furniture #1: Assembly Table - Design
Filling the time waiting for the new building shopping for machinery and designing shop furniture...
-
WIP: Shop Project #1: The Journey Begins
I’ve always wanted my own shop, but never had the room. The first house had no garage. Work...
