Tails From The Cathouse

  • Advertise with us
This blog is written by macatlin1 | 5 entries so far

Latest Entry

My Start #5: Advice Needed

06-22-2011 09:23 PM by macatlin1 | 3 comments »

Here is the shop building.It is 24×30 and is metal skinned with 2 ½ diameter steel tube framing with the structural tubes on 60 inch centers. The front wall with the garage door is framed and covered on the inside with plywood and on the outside with the same corrugated metal sheeting that forms the roof and walls. Shop from street. Shop opening. LH wall showing wall framing. RH wall showing wall framing. Close up of wall framing. Close up of roof framing. Man door framing. Rear wall framing. Garage door opener outlet. Front wall framing. The building is wired with a single 15A circuit that runs the garage door...

Read this entry »

Older Entries

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics