LumberJocks

Workshop safety

  • Advertise with us
Blog series by lightweightladylefty updated 08-22-2016 05:37 PM 1 part 1611 reads 11 comments total

Part 1: Workshop fire – averted . . . and a “whuf” question

08-22-2016 05:37 PM by lightweightladylefty | 11 comments »

In the process of making a jig, I routed a dado for T-track in recycled plywood. Since my trim router was already set up with a ¾” straight bit, I used it – making four shallow passes 9” long and a total depth of 3/8”. After each pass I stopped and vacuumed the sawdust. After the final pass when I started to vacuum, I saw burning embers and immediately stopped vacuuming. (You can see the burn remaining in the dado in the photo above.) I knocked the sawdust out of the dado and onto the ...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com