Morris chair restoration #3: The back cushion

  • Advertise with us
Blog entry by lightweightladylefty posted 11-11-2019 09:00 PM 550 reads 0 times favorited 0 comments Add to Favorites Watch
« Part 2: The frame Part 3 of Morris chair restoration series Part 4: The seat cushion »

I removed the mid-20th-century gray marble vinyl to reveal more of the chair’s history.

The top cushion’s original upholstery which was under the gray marble vinyl appeared to be an early attempt at Naugahyde – almost like a painted coating on the fabric.

The back cushion’s springs were in good shape.

The original straw and cotton was in pretty good shape, too, but I decided not to recycle any of it.

So I retied the springs and reinforced the back with two strips of wood . . .

replaced the original burlap . . .

and replaced the straw and cotton padding: first with a recycled box spring covering . . .

then with foam rubber and polyester batting.

After stapling on an undercovering, I fitted the final upholstery for the front of the cushion.

That pretty much completed the top cushion. (I didn’t get photos of the cushion after it was completed.)

-- “Those who would give up essential Liberty, to purchase a little temporary Safety, deserve neither Liberty nor Safety.” Benjamin Franklin -- Jesus is the ONLY reason for ANY season.

0 comments so far

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics