lewis62's Blog

  • Advertise with us
This blog is written by lewis62 | 1 entry so far

Latest Entry

delta 14 riser block shop made

01-02-2012 02:47 AM by lewis62 | 2 comments »

Money to thight. Had to make my own.2pcs. 1/2 inch plate about 3×5 1 pc. 2×4 rectangular tubing 5 inches tall1pc. after thought pc of angle iron 5 inches long added on compression side.Misc tack welds after putting in place.1 pc. 3/4 grade 5 bolt 8 in long from tractor supply about 4 bucksThe rest came from local small steel supply shop, about 25 bucks.doubled cutting height works great, but have to get bar stock and make up for guides to go all the way down, not a problem for now just using extra caution when cutting.Put original safety giude on riser side and add a shim with wire ties to hold in place for now , have idea to make permanent .Drill holes for bol...

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics