knockknock's Blog

  • Advertise with us
This blog is written by knockknock | 2 entries so far

Latest Entry

Using a toothed blade on the side of a box

09-11-2017 12:47 AM by knockknock | 0 comments »

Using a toothed blade to cleanup and flush the sides of a box. The side after glue up:Note: I purposefully made the pin board baseline short, so the tail board is proud. The side after using the toothed blade:Note: I planed diagonally with the grain and diagonally against the grain, lifting before reaching the edge. Then a few strokes with a smoother to remove the toothing marks:Note: First against the grain lifting after around one third, then with the grain lifting before the edge. The lid side toothed:Note: I have not beveled the lid yet, so the lid fits tight. Finally the sliding lid box:Note: Relief bevel still not done to the lid yet. Project link:

Read this entry »

Older Entries

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics