LumberJocks

kiwilynne's Blog

  • Advertise with us
This blog is written by kiwilynne | 5 entries so far

Latest Entry

Skateboard ring process breakdown

07-12-2019 07:49 PM by kiwilynne | 4 comments »

A quick breakdown for Jim Jakosh and everyone else interested in how I make a skateboard ring I cut a 3×3 cm blank from the skateboard using the deck’s original thickness. I then use the scroll saw to cut off the corners and reduce some of the extra wood. I put the blank on the lathe and get it down to a bit thicker than what the final ring will be, to account for additional finishing sanding. Make sure your chisels are sharp, because if it catches it can take a good piece out of the laminated wood. I then put it in the chuck and do some finishing on the inside. Probably a good idea to turn the lathe speed down here, especially if you’re going ...

Read this entry »

Older Entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com