kdc68's Blog

  • Advertise with us
This blog is written by kdc68 | 1 entry so far

Latest Entry

Dovetail Keys On The Router Table

07-12-2013 12:08 AM by kdc68 | 7 comments »

MAKING THE JIG This jig is made from 3/4” material that you may have in the cutoff bin. This is, more or less, a project specific jig. If you do a lot of boxes then adding hold downs, removable and replaceable inserts are possible if you want a more versatile jig. Also making a jig for more than one key per corner is possible by laying out each key in a couple of steps. I cover this later on. But this one is pretty basic and took just 20 minutes to put together. Layout begins by finding the center on the vertical panel portion of this jig and scribe a line. From the center point scribe two opposing 45 degree lines. Attach the legs to the vertical panel with cleats, rechecking y...

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics