kaetamer135's Blog

  • Advertise with us
This blog is written by kaetamer135 | 1 entry so far

Latest Entry

Quick 'N Dirty (but not dusty) Performax Mod

01-19-2014 12:07 PM by kaetamer135 | 5 comments »

I’m new to blogging; forgive my errors.Was thinking about better dust collection for my Performax 16/32 sander. That 2.5 hole was wholly inadequate.Decided to modify the top plastic cover with a 12×4” register box allowing direct connection to 6” ducting. Cut the hole, mounted the box, snipped the short ends to allow them to be bent inside the cover, drilled and screwed those “wings” down, and ran a length of heavy duty duct tape to seal all edges. Incredible difference. And yes, it’s time to change sandpaper…

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics