This blog is written by John Lowell | 13 entries so far |
-
Finishing up the workbench cabs
Finally got a few coats of poly on, and mounted the cab in the workbench. Now need some more stu...
-
Workbench drawers
Wanted to use up some material, improve storage and add weight to the bench. So, used MDF for ca...
-
Garage Cabinets #8: French cleat system
Used one sheet of 1/2 in ply to build two sections of a French cleat system. Then scrap pl...
-
Garage Cabinets #7: workbench fronts and top
another weekend, and working on the garage, again. Cut, shaped and edged the 3/4 in ply first la...
-
Garage Cabinets #6: Started with the lowers
Another few weeks, or months, put together a few lower units. Once the three were in, I cut out ...
-
Garage Cabinets #5: Scrap use in basement shop
Trying again, here are the three 24” boxes, with a few shelves – used up all the long...
-
Garage Cabinets #4: another 6 months - but hung a few more
Waited until I got into a cabinet mood, and then a few weekends. Finished up four more large, wi...
-
Garage Cabinets #3: Hung, errors and happy new year!
Well, we hung the first four without many problems except for two. 1) striped the square driv...
-
Garage Cabinets #2: 1/2 year later
Been a bit sidetracked, but this holiday am back on the cabinet job! Hey, only 150ish days. Did...
-
Garage Cabinets #1: Dumb, dumb dumb.
Dumb, dumb, dumb. If there ever was a hard way, am sure I can find it. Stared cleaning up the...
-
Woodworking Show in Baltimore
Had a great day at the Woodworking show this weekend, met some LJ’s, kids turned pens, look...
-
Christmas
Merry Christmas to all! Got the presents open, kids have everything spread out over two rooms, a...
-
First Blog
OK, so I signed up, now what? Not sure where this community will take me, but am willing to go f...