LumberJocks

Jim Reeves's Favorites

  • Advertise with us
View Lee A. Jesberger's profile

Demilune table tops #4: Crotch Mahogany Demilune Table

08-08-2010 01:33 AM by Lee A. Jesberger | 30 comments »

I finaly got the chance to get this table completed. I didn’t like the way the legs looked, so I decided to add gold leaf to them. Made a big difference. The table looks much better with it. I used an imitation gold leaf, since I had some on hand. It looks good. Thanks for looking. Lee

Read this entry »


View Porosky's profile

Drunken Cutting Boards #1: Drunken Alice in Wonderland Cutting Board

09-10-2009 03:22 AM by Porosky | 54 comments »

Hey everybody, after a few personal messages here is my version of a how to on a Drunken Checker Board. I of coarse bow to the Chairman of the Board and pay tribute with beer. This is a Off-Checker pattern I call “Drunken Alice in Wonderland” The “serendipitous” nature of this piece is appealing in a far out sort of way. Here Goes… So first I prepare the Material. I am using Hard Maple and Walnut both are surfaced flat and cut 1” x 9” x 14&...

Read this entry »


View Greg Wurst's profile

Garden Bench with Table #3: Finished

07-13-2008 02:32 AM by Greg Wurst | 5 comments »

Got to work on the bench Friday evening and today. I started Friday by cutting the armrests to shape. The rear had to be notched at a 7 degree angle, which I did on the bandsaw for one piece and the scroll saw for the other. I then cut the front and rear table pieces from the 2×8 blocks. I used Sketchup to print a scale model of the curve to transfer to the pieces. I then cut a couple cup holders, which I somehow cut one closer to the side than the other. I thought both were ...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com