jgt1942's Blog

  • Advertise with us
This blog is written by jgt1942 | 1 entry so far

Latest Entry

Dust Pipe fittings #1: DIY Fittings

07-07-2020 04:19 PM by jgt1942 | 5 comments »

I recently received my new dust collector (Harvey Gyro G700) and was a bit anxious to get it going but a long way from determining where the final resting place would be in my shop. Thus I decided to use flex pipe (for now) and possibly move the unit as needed. As I suspected moving the G700 around in my shop was not a good option because it was a royal pain. My shop is about 16×55, thus I relocated the G700 about the middle of the 55’ run and use the flex pipe. I quickly realized that I did not have enough fittings to assemble the pipe and make some connections. Also the fittings on some of the tools were different sizes. First I modified the DC on my bandsaw (see https://w...

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics