Tool Cabinet

  • Advertise with us
Blog series by Jeremy Greiner updated 02-05-2011 05:38 PM 2 parts 7194 reads 9 comments total

Part 1: Assembling the shell

02-02-2011 04:42 AM by Jeremy Greiner | 8 comments »

I’m building a fold out tool cabinet from Wood Magazine I thought it would be fun to record a video of the assembly process. It took me 3 dry fits and adjustments until I got everything ready to glue up. The glue up itself took 15 minutes the video is timelapsed/fastforwarded so it’s only about a minute long. Any questions, comments or suggestions are always welcome. -jeremy

Read this entry »

Part 2: Cutting the parts for the doors

02-05-2011 05:38 PM by Jeremy Greiner | 1 comment »

I would have done this sooner, but I did not have enough pegboard to do all the doors and the lowes by me did not carry 4×8 sheets of pegboard, and the HD by me only had the white pegboard. The OCD nature I wanted all the pegboard to match so I ventured to a borg store a few miles away. Found one that had good pegboard yesterday and I was set and ready to cut out all the parts for the doors. Below is a video of me dimensioning all the parts needed for the 4 doors of the tool cabinet. ...

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics