LumberJocks

My Shop Projects

  • Advertise with us
Blog series by jesinfla updated 05-28-2016 05:57 PM 3 parts 4602 reads 1 comment total

Part 1: My first rolling cart

04-27-2016 08:22 PM by jesinfla | 1 comment »

This is my first rolling cart. I made this based on plans I found on the internet, to be used as an AC cart. The legs were first Next I did the bottom Then the top Next attach the legs And wheels Roll it where the A/C unit will go – This is where the cart and the AC will be resting with the AC compressor hanging out the window of the door. I still need to build the riser which I should get to this week. Once that’s done, I’ll enclose my...

Read this entry »


Part 2: Drill press build

05-01-2016 06:07 PM by jesinfla | 0 comments »

Got my drill press. It’s much larger than I thought it would be, but it is what it is… First the box Layout Parts More Parts Put the stand together I kept looking for the square table from the instructions… iT’S ROUND!!! Not sure I like that but we’ll see. Took awhile to get the table on – terrible instructions – you have to insert the rail into the table holder before sliding it over the stand shaft Ok, got t...

Read this entry »


Part 3: PVC Shop Wall

05-28-2016 05:57 PM by jesinfla | 0 comments »

If you live in Fl, you know temperature control is less than easy. My small shop is in the garage – there is no A/C or heat in the garage and the cost to insulate for heating and A/C is way beyond what I am willing to spend on a garage! My garage is actually quite large – it’s a 2 car with an additional 8 feet depth which is where my shop is located What I opted to do for the summer (it’s unbearable in there in there in summer, and I usually avoid working in i...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com