Homemade Cyclone Dust Collector
I will try and share as much information about my cyclone as I can. When I first got started I went to Home Depot and to just see what they had. I found an 8” x 24” duct that was split down the middle, next I found cut off pieces of 2” PVC 24” long, in the plumbing area I found 2” rubber couplers with band clamps on both ends, all I needed now was a 5 gallon bucket and I had all the parts I needed. I didn’t take any pictures during construction so I will just try and describe what I did. I got 2 small C clamps and clamped the top of the duct together then just twisted the bottom until the diameter was about 3” and clamped it. Then using t...