LumberJocks

Craftsman table saw upgrades

  • Advertise with us
Blog series by jaydubya updated 03-11-2012 04:07 AM 2 parts 6312 reads 7 comments total

Part 1: Project plans

02-27-2012 10:46 PM by jaydubya | 2 comments »

Ive had my Craftsman 21833 table saw for a little over a year. Ive been torn over which direction to go with it. I was going to build my own T-square fence until i stumbled on a sawstop professional T-square fence. here is what i plan on doing to the saw 1. Sawstop fence upgrade2. Mobile platform. At first i will simply build the platform and place the saw on it on the leg set that came with the saw. then ill build a cabinet for the saw and a cabinet with drawers to sit beside it, then yet...

Read this entry »


Part 2: Sawstop 52 inch fence upgrade

03-11-2012 04:07 AM by jaydubya | 5 comments »

Got my 52 inch sawstop professional T-square fence installed today. It wasnt too difficult, but i wouldnt want to do it over again. I had to drill all new holes in the cast table. basically started small and drilled out to my final size (5/16) in 4 steps. Drilling the cast was easy as can be. I still have some final adjustments to make. I need to either get new adhesive measuring tapes or drill and tap new holes as they dont line up currently. I also need to figure out a new right side extens...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com