Credenza / Entertainment Center

  • Advertise with us
Blog series by jamsomito updated 07-26-2020 02:36 PM 3 parts 843 reads 0 comments total

Part 1: Growing Some Legs

05-04-2020 01:04 AM by jamsomito | 0 comments »

Started on my entertainment center / credenza project today. If you look back in my posts you can probably find one with my design questions, but here’s where I landed: Everything is going to be stained red oak to match its destination. I started by picking my best rift-sawn boards and cut them to length. Then ripped them to width. I did this in about 4 or 5 passes, kind of like sneaking up on the final dimension. In lieu of a jointer, I find this method wo...

Read this entry »

Part 2: Rails and mission slats

07-19-2020 09:05 PM by jamsomito | 0 comments »

Alright the legs presented a problem. I made a thread about it and you guys helped a ton. You can read about it here if you’re interested: But in the end, I’m really happy with how they came out. Since then I added the angles on all the inside faces at the bottom. Next step was making the rails. I tried sifting through my stock to find similar grain patterns and, more specifically, some grain patterns that jived with the a...

Read this entry »

Part 3: Top

07-26-2020 02:36 PM by jamsomito | 0 comments »

Well it appears there is a new adventure every step of the way! Yesterday my goal was to make a top. It was to have a mitered frame around a center panel, so plywood it was. I had already done the exact same thing on another project so I could see the steps before me. I posted that project here: Tongue and groove trim, mitered corners. No big deal, right? Haha. First I cut my trim to exact width. No tongue. Shoot, guess I’ll ...

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics