LumberJocks

Craftsman Saw Rebuild

  • Advertise with us
Blog series by inghamworkshop updated 09-04-2016 01:44 PM 3 parts 2630 reads 5 comments total

Part 1: Intro and Gameplan!

08-28-2016 01:21 PM by inghamworkshop | 3 comments »

Hello everyone, it’s both my first post to the site and my first ever blog post all in one. I’ve been browsing the site for a few weeks now because I’ve been on the market for a new table saw and sort of fell in love with the idea of rebuilding a Craftsman 113. Well after contacting a couple of people through my local Craigslist, today I went out and picked up not just one but two table saws. The first saw I found and actually had a friend go and take a look at for me...

Read this entry »


Part 2: 113.29990 Cleaning Face Plate

08-31-2016 02:07 AM by inghamworkshop | 2 comments »

I’m looking for som help and guidance here. I decided to try and tackle the cleaning of the silver plate on the front of the saw, which I believe is aluminum, and I’m hoping someone more knowledgeable than me can help. Here’s what I started with: My initial thought was to use water, mild soap and a nylon bristle brush. That did clean a good portion of the large easy to get stuff, but it’s left me with this. I don’t want to do something that I can&#...

Read this entry »


Part 3: Face Plate Clean Up

09-04-2016 01:44 PM by inghamworkshop | 0 comments »

I had to come to terms with not being able to restore this piece an keep the original finish, there was just to much corrosion. I used a progression of wet/dry sandpaper starting at 320g an working my way up to 2000g. It came out pretty good and I’ll probably follow this up with some sort of aluminum buffing compound and a buffing wheel.

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com