ikillbugs's Blog

  • Advertise with us
This blog is written by ikillbugs | 4 entries so far

Latest Entry

Workshop Transformation #4: Miter Saw Station

04-29-2014 02:29 AM by ikillbugs | 3 comments »

The table the miter saw sits on is built from new wood, 24” deep, 48” long. The “extension” table on the left is built from scraps and 1×3 and 1×4 furring strips; it’s 60” long. The miter saw is screwed in place, as is the stop fence. I constructed a stop block that is held in place by a regular clamp for repetitive cuts. I will likely add a dedicated clamping system at some point to the stop block but that’s for later. Instead of having the saw at a lower level as I have seen in most other miter saw stations, I decided just to make a couple of blocks to keep the material level and hold it up during cuts. I just...

Read this entry »

Older Entries

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics