Yellow Box Burl Coffee Table #2: Leg

  • Advertise with us
Blog entry by icemanhank posted 02-06-2016 04:23 AM 966 reads 0 times favorited 0 comments Add to Favorites Watch
« Part 1: Flattening the burl Part 2 of Yellow Box Burl Coffee Table series Part 3: Ready for the glass »

Hi all

Here are a couple of pics of the leg for my table. As said before it is Sequoia, I have cut the piece in half and rejoined on a slight angle buy butting the sides together and making splines from a piece of Mountain Ash for a littlit bit of contrast.

It was a bit of a pain to glue up as the joints were quite tight and clamping the edges meant the joint opened up, hence the need to clamp the ends to the bench and juggle the pressure of the clamps to get everything a nice fit.

-- "These are my principles. And if you don't like them, I have others." ... Cheers, David from Sydney Australia

0 comments so far

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics