LumberJocks

Wooden Models #259: Getting started on an old car

  • Advertise with us
Blog entry by htl posted 07-16-2019 08:33 PM 2148 reads 0 times favorited 7 comments Add to Favorites Watch
« Part 258: Cattle cars number 3&4 Doors & Roof Part 259 of Wooden Models series Part 260: 32 Ford working on the radiator »

I build this Toys and Joys car [1932 Ford] way back but used pine and just was never happy with the way it came out so lets try it again with some oak.
This is a very simple [old] plan so doesn’t come with many details.

Cut out the sides and frame then sand sand sand!!!

Glue up for the hood, I don’t have much of this really figured oak so will be facing some plywood to get it done.

Here I’m taking off the masking tape and pattern for the frame really makes clean up easy.

Picture of the parts.


Will need to be playing with some spoke wheels in the near future me thinks. :-]

-- An Index Of My Model making Blogs https://www.lumberjocks.com/htl/blog/130264



7 comments so far

View GR8HUNTER's profile

GR8HUNTER

8076 posts in 1632 days


#1 posted 07-16-2019 09:04 PM

this car will look pretty good in oak :<))))

-- Tony---- Reinholds,Pa.------ REMEMBER TO ALWAYS HAVE FUN :<))

View Orvile Baker's profile

Orvile Baker

272 posts in 1598 days


#2 posted 07-16-2019 09:37 PM

I agree it should be a keeper.

-- Bud Baker , Ojibwa, WI. http://papabudswoodtoys.webs.com/

View FrenchGoattoys's profile

FrenchGoattoys

107 posts in 669 days


#3 posted 07-17-2019 01:58 AM

You are well on your way to something I think is going to look fabulous.

-- KJ, Spokane, WA.: Don’t count the days; make the days count.

View crowie's profile

crowie

4074 posts in 2870 days


#4 posted 07-17-2019 06:04 AM

Watching and learning from a master.
Thank you Bruce, this will help me wit ideas and “how to’s” for my 1933 Ford.

-- Lifes good, Enjoy each new day...... Cheers from "On Top DownUnder" Crowie

View FrenchGoattoys's profile

FrenchGoattoys

107 posts in 669 days


#5 posted 07-18-2019 01:28 AM

Is there an angle at the trunk? Can’t tell. If so, what is the angle?

-- KJ, Spokane, WA.: Don’t count the days; make the days count.

View htl's profile

htl

5297 posts in 2079 days


#6 posted 07-18-2019 02:26 AM


Is there an angle at the trunk? Can’t tell. If so, what is the angle?

- FrenchGoattoys

It fits the shape of the body and is flat across the back, It hasn’t been sanded yet, hope that’s what your asking for.

-- An Index Of My Model making Blogs https://www.lumberjocks.com/htl/blog/130264

View Vaske's profile

Vaske

3 posts in 190 days


#7 posted 05-26-2020 05:14 PM

I like this, how I can get plan?

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com