LumberJocks

Another Delta T2 Craftsman install

  • Advertise with us
Blog series by hotbyte updated 03-31-2013 11:08 PM 2 parts 7378 reads 6 comments total

Part 1: Install

03-24-2013 12:56 AM by hotbyte | 4 comments »

Just finished installing my new Delta T2 fence on my Craftsman saw (model 113.298720) that I bought new in ‘87 or ‘88. Yes, I’d suffered that long with the original fence! I used the existing holes in both the rails and table that are just to the left of the blade. I drilled additional holes in the right side extension wing. The hardware pack that came with the fence only included 2 bolts each for front and rear rail. I plan on picking up 2 additional each at hardware...

Read this entry »


Part 2: Tweaking and table extensions

03-31-2013 11:08 PM by hotbyte | 2 comments »

With the T2 installed, it was time to do some tweaking to the setup and install some table extensions. I had read in a few other posts about loosening the bolts holding the aluminum faces to the fence to close up the gap between fence and table top. I placed the fence upside down on workbench and loosened the bolts from the bottom side of the fence. This let the main fence tube drop down which was really up since fence was upside down. After tightening the bolts, I checked clearance and i...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com