Another Delta T2 Craftsman install #2: Tweaking and table extensions
With the T2 installed, it was time to do some tweaking to the setup and install some table extensions. I had read in a few other posts about loosening the bolts holding the aluminum faces to the fence to close up the gap between fence and table top. I placed the fence upside down on workbench and loosened the bolts from the bottom side of the fence. This let the main fence tube drop down which was really up since fence was upside down. After tightening the bolts, I checked clearance and it is about 1/8”. Here’s a picture of some 1/4” luan against the fence (there’s a chunk of wood holding the luan down). Next task was to install an extension to the right si...