LumberJocks

Photos and info on 1/8th scale model 5130 #9: Boom and cylinder for the excavator bucket

  • Advertise with us
Blog entry by hookfoot posted 11-30-2019 12:44 AM 440 reads 0 times favorited 2 comments Add to Favorites Watch
« Part 8: Operator side compartments 5130 shovel front-excavator etc. Part 9 of Photos and info on 1/8th scale model 5130 series Part 10: Continuation of boom info. »

This photo should have been in the last blog.. I found it a couple of days ago. This is the compartment on the left rear. The grill work needs screwed into the door frame. It was built one piece at a time. Custom built for the opening. I am enlarging the profile photo from the Cat pamphlet to get the arcs etc in the right places. I know the measurements between the pins so I blow up the image till I get the measurements that I need between the pins. When I get that point I have the side profile. Something came up. Will finish another day Sorry.



2 comments so far

View crowie's profile

crowie

3329 posts in 2513 days


#1 posted 11-30-2019 05:09 AM

Thank you for the progress

-- Lifes good, Enjoy each new day...... Cheers from "On Top DownUnder" Crowie

View htl's profile

htl

4860 posts in 1721 days


#2 posted 12-03-2019 05:30 AM

Coming together nicely!!!

-- An Index Of My Model making Blogs https://www.lumberjocks.com/htl/blog/130264

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com