LumberJocks

handyman64's Favorites

  • Advertise with us
View SPalm's profile

Double Tumble Cutting Board

05-31-2011 03:11 AM by SPalm | 41 comments »

Or maybe I should call it Two and a Half Steps. Anyway, I cannot believe that I am building another one of these, but heck, they are so much fun. This is a continuing saga of endgrain geometric boards using three contrasting woods. A light color, medium color, and dark wood selection are jointed and planed to the same thickness. I started by tilting the blade to 60 degrees and ripping an edge on all three boards. I then moved the blade over about an inch and ripped again creating a sma...

Read this entry »


View SPalm's profile

Another Cutting Board Design

07-12-2010 05:00 PM by SPalm | 27 comments »

I am in the process of building another board and thought I would share my thinking process along with some build pictures. When I came up with the design for the Steps board, I was thinking about how one draws a 3D box on a piece of paper. You draw a large square, and then add small mitered edges to one corner to give the appearance of seeing it slightly from the side. Making these miters out of two different woods adds to the shadows, which adds to the effect. I did this for the Steps b...

Read this entry »


View degoose's profile

How to make a endgrain tumbling block butcher block board!

08-12-2009 12:13 PM by degoose | 58 comments »

Hi guys ,, I had a request to make a tutorial with regards the endgrain Tumbling Block Design.First off,.., You need to decide the size of the blocks…. for this example I used 1” stock… Or something similar.. actually just over .. once dressed. Set the blade of the table saw to 60 degrees.. a bevel box makes this simpleI use the INCRA fence system so it is easy to rip bevels off side of the blade.Once the bevels are ripped measure the length of the bevel and move the f...

Read this entry »


View BritBoxmaker's profile

Project SC #1: Tightrope walking for beginners

08-08-2010 04:07 PM by BritBoxmaker | 21 comments »

In my last blog I showed a pattern which I am determined to try. It is made of rectangles from 1mm to 12mm in size. Due to a shortage of materials (Ebony) I am making the pattern from 1mm to 10mm. This is because my aim is to make a box using this pattern (or parts thereof) on all visible faces. This is the tallest order I have placed on myself to date. ImpossibleII now seems a fond memory. Machining wood down to 1mm square is a nightmare. A bit like I imagine tightrope walking to be a...

Read this entry »


View newTim's profile

Secrets of the String Box Revealed #1: Intro and Invitation

08-25-2010 07:10 AM by newTim | 15 comments »

This summer’s projects have been boxes. Lots and lots of boxes. Somewhere along the way I got the idea of combining the wrapping technique with a simple inlay to see how hard it would be to align the lines all around the box. In other words, at the corners. Turns out it is not that hard to do. So I’ve been experimenting. I’ve posted the first completed boxes as a Project and will post more upon completion. The photos below give an overview of this technique and the pi...

Read this entry »


View Mary Anne's profile

Toot, Toot, Tootorial #2: How to make a whistle on a lathe

05-08-2010 09:11 PM by Mary Anne | 27 comments »

TOOT TOOT TOOTORIAL TWO This time, we’re going to turn a whistle on a lathe. I will be including some beginner level information since a few of the people who showed an interest in this project are novices. Besides, I think it is a great beginner project; it requires no parts or kits, just a chunk of wood, your lathe, your tools, and you. Please use all safety precautions you have available! I can’t think of any good stories to start with this time, so let’s get right toot it. Th...

Read this entry »


View Woodworker_Collins's profile

Homemade table saw video :)

04-15-2013 07:04 AM by Woodworker_Collins | 8 comments »

Here’s the link for the video finally http://m.youtube.com/watch?v=_xrx1n2WgPs

Read this entry »


View GarageWoodworks's profile

Raised Panels with a Straight Bit. What? You're Crazy!

05-03-2013 02:17 PM by GarageWoodworks | 0 comments »

You can get the plans to the tilting fence if you want here: Plans I’m on TwitterI’m on YouTube Subscribe!

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com