Rocking Horse

  • Advertise with us
Blog series by handsawgeek updated 10-03-2018 01:18 PM 2 parts 1421 reads 4 comments total

Part 1: A Brand New Handsawgeek Project!

10-02-2018 01:24 PM by handsawgeek | 1 comment »

Hi, Folks,The last time I posted here was waaaay back in February. The woodworking section of the handsawgeek shop has lain idle except for a simple knock-around project or repair here and there. Shop time has been largely devoted to my other hobby, model rocketry. But, now, things are about to change. In a previous distant post, I mentioned that there was another grand-kiddo on the way. This happened back in late March. The little tyke is now over six months old, and it’s...

Read this entry »

Part 2: A Man With Some Plans!

10-03-2018 01:18 PM by handsawgeek | 3 comments »

The Wood Magazine containing the rocking horse article features a pull-out section with all of the issue’s full-sized patterns. The pull-out sheet is printed on both sides, so naturally the patterns cannot just be cut out without messing others up on the backside. Irritating. My work-around for this was to lay the pull-out on a glass-top coffee table with a desk lamp pointing up from below. A blank sheet of tracing paper was laid on top of the pattern sheet, allowing me to trans...

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics