grovemadman's Blog

  • Advertise with us
This blog is written by grovemadman | 2 entries so far

Latest Entry

Converting the Knockdown Saw Horse to a Full Sized Outfeed Table

02-17-2008 03:08 AM by grovemadman | 8 comments »

Wouldn’t it be great if you could take a small tabletop saw or midsize contractor saw to a jobsite and have a full sized outfeed table similar to a production shop? The kind of outfeed that would breakdown and set up quickly and store out of the way if needed on a daily basis, and not waste time consuming labor? Of course it would. Here is an Idea I had about the knockdown sawhorse I made the other day. I will make this blog into a small series and I will be open to new ideas and thoughts so we can all enjoy the project and fulfill our needs individually. The first problem I came across is the height of the saw and how level it is. (Figure 1c) While I made my sawhorse/table hasti...

Read this entry »

Older Entries

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics