gridlockd's Forum Topics

  • Advertise with us
View gridlockd's:homeworkshopprojects (39)blog (6)reviews (0)forum topics (12)buddies (1)favorites (25)activity logWatch
12-15-2019 11:12 PM

Performax 22-44 3 leg - 1 reply

All, I need some help! I own a performax 22-44 older model with the 3 leg stand. I inherited it from my father when he stopped making cabinets. I just recently began using it more frequently, mostly due to my inability to get it “dialed in” to sand evenly.That being said, I had to replace the conveyor belt because my son decide...

10-03-2019 10:40 PM

advertising trolls - 4 replies

anyone else getting these bogus commenters on your projects trying to get you to go visit their 16,000 woodworking plans website? very annoying, how did they get in here?

10-21-2014 01:36 PM

Jewelry and small box hinges, lining, etc. - 10 replies

Hello All, I have made a couple of small jewelry boxes, or keepsake boxes, whatever you’d like to call them. I am trying to get the small lid hinges attached and am struggling with alignment and getting them to close properly, attaching them etc. I profess that these small boxes are not in my regular repitiore, but i thought, “h...

10-14-2014 08:35 PM

Steel City Table Saws - 7 replies

Please forgive me if this is already out in the forum somewhere. I am, in the near future, going to be purchasing a new table saw. my inherited, 35+ yr old craftsman just isn’t getting it done for me anymore. I have been looking at several different brands, but was interested in the steel city saws. anyone had any experience with their...

04-10-2014 08:41 PM

Need some advice on replacement lathe banjo/tool rest - 2 replies

Hello all, I need some advice/recommendations on a replacement banjo for my lathe. I’ll spare you all the the long story and just say this: I own a grizzly G0462 lathe, the banjo/tool rest is garbage and I need to upgrade/replace it. Will any banjo work for me or does it need to be specific to my particular model? any and all help i...

02-24-2013 03:10 PM

(SOLD) Incra LS32-ts - 15 replies

Hi guys, I have an Incra LS32-TS table saw fence I am going to sell. I bought it new in Feb. of ‘12. It is currently on my table saw, and has been lightly used for the year I’ve had it. I have all the parts/pieces, manual and even the DVD that came with it. I don’t have the original box though. I am selling it basically just...

12-05-2012 03:32 PM

Need a little help/advice - 10 replies

Hi all LJ’ers! Got a question for you jocks that have made/refurbished entry doors. I have a customer/friend that has a hardwood front door with glass and sidelights. the sidelights are fine, but the door itself is the issue. it faces the afternoon sun and has dried up and cracked at the jointed seams. What is the best way to go about...

04-26-2012 01:44 AM

anybody use one of these? - 9 replies

Hey guys, got a question for all you turners. I have been turning on an old shopsmith Mark V. long story short, It will no longer turn true. I have already put a good bit of money into it trying to refurb it. I have tools that replace all aspects of the shopsmith except the lathe. I’d love to have a big monster powermatic, but my budget wo...

04-03-2012 12:05 AM

bowl turners, please advise... - 3 replies

ok, I have seen several vids on u tube where this guy or that guy is turning a bowl. it comes to the finishing and I see them grab an air powered sander with what looks like about a 3” sanding disc on a conical foam backer pad. I go “ooohhh, i want one of those!” I checked the big box stores hoping to pick one up…no lu...

03-05-2012 10:11 PM

Help on bowl blanks - 3 replies

Hey LJ’ers! I have a friend that recently cut some really nice maples down for his M-I-L. he offered me the wood and I got all i could carry. I want to turn some bowls out of them, and from the looks of the first blank, they are going to be some beautiful pieces. My question is this: once i cut the blank and turn it to round I wan...

01-17-2012 04:48 PM

Questions on CA Glue finish - 5 replies

I am new to pen turning, but have come to the conclusion that CA glue provides an extremely durable finish. I have done a few pens and they all seem to have turned out “ok”. I am using medium CA, applied with a piece pf paper towel. I apply 3 coats then sand, then 3 more coats, sanding lightly in between each one. I am seeing some...

01-13-2012 03:15 AM

A little help if you please, Fellow LJ'ers - 6 replies

I am preparing to join the pen turning addicts, and need a bit of help. I have purchased a mandrel and some beginner pen kits. I have my blanks ready and have watched more video tutorials than I can count. I neglected to buy a barrel trimmer, however. Is there another way to trim barrels flush or is this the only way?

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics