LumberJocks

granite's Favorites

  • Advertise with us
View Brad_Nailor's profile

Don K's Mobile Table Saw Stand Sketchup Model

11-12-2009 08:15 AM by Brad_Nailor | 6 comments »

I have been threatening to buy a new table saw for a few months now and as all the planets seem to be aligned I am finally going to take the plunge…before i end up spending the money on Christmas! I am going to get a Grizzly G0690. I came to this decision thanks to allot of great input from the people on this site in particular Don K. He owns this saw along with a few other Grizzly pieces and doesn’t hesitate to sing the praises of this saw. After the Shop Fox rolling base he purc...

Read this entry »


View NeophyteGrant's profile

Shop Implements/Jigs et al #1: Easy, Cheap Mobile Base for the Small Shop (BONUS: Lifting Your Machine on Them Simply)

01-10-2019 10:45 PM by NeophyteGrant | 3 comments »

This is a slightly personalized version of a base conceived of by Don K and Brad Nailor: http://lumberjocks.com/Brad_Nailor/blog/11845 Like many, I do not have a large shop. I’m a hobbyist and use the garage. Up until a month or so ago I had used a variety of Shop Fox and HTC mobile bases on all my stationary machines but had found that the 2 fixed and 2 swivel caster design, in my case, was a hindrance rather than an asset. With this configuration, moving machines is a game of paral...

Read this entry »


View clin's profile

Spanish Cedar Gate

12-30-2016 02:38 AM by clin | 7 comments »

I’ve been making some gates for my house. Here’s a link to a project I posted a earlier. Here’s the drawing. the gate is roughly 6 ft tall and 4 1/2 ft wide. So it is a rather large gate. While the back gates, made from inland red cedar, came out fine, I wanted a more refined look for the large front gate leading to our house. After calling around, a small lumber dealer “Southwest Lumber” in Albuquerque, NM suggested I consider Spanish cedar. So I h...

Read this entry »


View dutchtouch's profile

4 legged stool #1: compound angle holes on a drill press

10-18-2016 07:04 PM by dutchtouch | 3 comments »

Hello, I am trying to build the 4 legged stool Fabian Fischer’s stools online fine woodworking. I am having problems drilling the holes at compound angles and was looking for some advice. Also any advice on carving out the seat. Thanks

Read this entry »


View Ripthorn's profile

The Ultimate Shop Made Router Plane #1: The plan, the parts, the prototype

12-15-2012 04:04 AM by Ripthorn | 16 comments »

EDIT: A lot of the pictures are too large. You can see them here So last week I was watching Tommy MacDonald’s series on his tool box. When he pulled out the router plane to clean up some dadoes, I figured I should look into one. After seeing the prices for them, I decided I would look into making one. There are plans all over the place for them: the $5 router plane, Derek Cohen’s old woman’s tooth, numerous projects here, and the list goes on. However, most people s...

Read this entry »


View mafe's profile

Small router plane tutorial blog

05-01-2011 01:37 AM by mafe | 44 comments »

Small router plane tutorialanother of my tool making journeys I have a Stanley and a Record router plane, but sometimes it would be wonderful with a small router plane, I have been looking at the Veritas small router plane, but thought it could be fun to make my own, so when I purchased some stuff from Lee Valley I also ordered a 9,5 dollar Veritas blade for their small router. This little blade has then been resting in my plane cabinet until I had the right idea for a design, at first I j...

Read this entry »


View Mike Lingenfelter's profile

Jigs and Fixtures #1: Planer Sled

05-22-2008 02:39 AM by Mike Lingenfelter | 21 comments »

As part of my workbench project I needed to mill up a somewhat large piece of lumber for the main chop on my face vise. It was larger than my 6” Jointer could handle. I needed to find an easy way to mill the 2 large faces. I have been wanting to make a Planer Sled for awhile now, so that’s what I did. I based mine on one Keith Rust did for Fine Woodworking “Flatten Boards without a Jointer”. This article is available at finewoodworking.com, but it is only available if you have a ...

Read this entry »


View Rick  Dennington's profile (online now)

A new look for an old workhorse.........!!

05-05-2010 07:14 PM by Rick Dennington | 28 comments »

Greetings all: I’ve had this old Sears contractor saw for 26 years, and it served me well, and still serving me well. After about a week of having it, I knew it was time for a new make-over then. So I took off the old “diamond” wings, (I hated them things..pinched my fingers everytime I used the saw), removed the crappy fence, and went on a “search and destroy” mission. After checking around for the best fence that would fit the saw, I settled on a Delta Prec...

Read this entry »


View David White's profile

Easy Build Workshop Stool.

07-21-2014 08:57 PM by David White | 5 comments »

NOTE: A PDF version of this post and the Sketchup model are available in the downloads section of my blog. If you’re planning to build this stool, I suggest you get them as the images herein are of pretty poor resolution. My time in the shop is pretty limited and building shop furniture is not something I particularly enjoy (I’m more of a fine furniture kinda guy), so when I do feel the need to make something for use in the workshop I like it to be simple, sturdy and quick to build....

Read this entry »


View David's profile

Hand Plane Restoration #1: Stanley Bench Plane

10-15-2007 10:24 PM by David | 74 comments »

STANLEY BENCH PLANE RESTORATION Click here for large format version PDF ELECTROLYTIC RUST REMOVAL INSTRUCTION SHEET More information available on my woodworking blog & podcast The Folding Rule Show Step #1 – Cleaning & Rust Removal I have been inspired by a number of resources to start using my hand planes and start on the slippery slope of a hand plane collection. Not the least of whom has been Wayne, our own Lumberjocks plane guru. Of course I have also explored...

Read this entry »


1 2 next »
16 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com