glideking's Blog

  • Advertise with us
This blog is written by glideking | 11 entries so far

Latest Entry

Tool Cabinets #9: Hand cut mortice and tenon door frames

01-27-2018 07:02 AM by glideking | 2 comments »

Plywood cleat on tool cabinet back Cleat on wall Cut panel groves 3/8” with Stanley 45 Used a hardwood block as a guide to keep mortices square to stock Chopped the tenons out with a chisel I left the tenons long enough to support both sides of the hand router then cut to length. I used a second router set to final depth for a fine cut.

Read this entry »

Older Entries

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics