LumberJocks

Garth's Blog

  • Advertise with us
This blog is written by Garth | 6 entries so far

Latest Entry

Upgraded Shutoff Switch on SawStop

03-24-2017 11:20 PM by Garth | 3 comments »

I just upgraded my 1960’s table saw to a SawStop. I have only made a few cuts with it; however, I realized I really missed something on my old table saw. I did a rip cut and was standing off to the right of the blade and held the board down. I then had to reach way over the far left end of the saw to turn it off. On my old saw, I had placed a large shutoff in the center, where I could easily shut if off with my knee. I got used to turning off the saw with my knee and could keep my hands on a piece of wood if needed. At that point, I knew I wanted to figure out how to turn off the saw from the left side of the blade and also wanted to do it with a knee. I thought for about 3...

Read this entry »

Older Entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com