flatboarder's Blog

  • Advertise with us
This blog is written by flatboarder | 9 entries so far

Latest Entry

Jointer Tables

06-02-2012 10:42 PM by flatboarder | 3 comments »

Hello Peoples, I have a question about my Jointer tables. It’s a G.I. 225hc m1 . After I s4s a 2 1/2’ square post thats 35” long I went back to fix one that wasnt square to the adjacent side. When doing so I noticed that the jointer was tapering the board from back to front?. In other words it was getting thinner at the end of the cut. My technique is good so its not that . Is it because the outfeed table is higher at the far end or is it because its lower at the far end. I forget sometimes and this is one of those times. Thanks for the help.

Read this entry »

Older Entries

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics