LumberJocks

fivecodys's Woodworking Reviews

  • Advertise with us
View fivecodys's:homeworkshopprojects (17)blog (0)reviews (4)forum topics (40)buddies (0)favorites (176)activity logWatch
One Year Later  WEN 3410 Air Filtration System

One Year Later WEN 3410 Air Filtration System

02-02-2019 07:40 PM by fivecodys | 9 comments »

I wanted to wait a year before giving my review of the WEN Air Filtration System. I added this unit to my shop at the same time as I installed my dust collection system. (Jan 2018) I have it mounted in the are of my shop that generated the most dust. It hangs over that area from the rafters.It is to the right of my table saw and over the bandsaw, planner, jointer, & router table. .It was difficult to tell how much this unit was helping to reduce the fine dust in the air...

Read this review »


WorkSharp WS3000 Wide Blade Attachment Changed Everything!

WorkSharp WS3000 Wide Blade Attachment Changed Everything!

09-25-2018 06:25 PM by fivecodys | 11 comments »

I purchased my WorkSharp 3000 last year for the primary purpose of sharpening chisels.It seems to do that pretty well and I was happy until I fell into the world of old hand planes.This seemed to take forever.I was not very happy with the results I was getting.I had pretty much fell out of love with this machine and then I read about the wide blade attachment.Holy cow! What a game changer! I had this installed and ready to go in just a few minutes and with the handy guide it comes with, for...

Read this review »


Contractor Saw PALS-  Should Have Done This Sooner

Contractor Saw PALS- Should Have Done This Sooner

09-25-2018 06:08 PM by fivecodys | 8 comments »

After reading several reviews and watching every video I could find, I decided to try the Contractor-saw PALS alignment system.Previously I was using a bar clamp to pull the rear trunnion into alignment as I tightened the bolts.It was a hit and miss process and I really didn’t have a good way to measure my results. I coupled the PALS with this jig I found posted here on Lumberjocks: http://lumberjocks.com/projects/96896 The PALS do exactly what they claim to do. The instructions ...

Read this review »


Freud P410 Fusion Full Kerf

Freud P410 Fusion Full Kerf

01-04-2016 09:50 PM by fivecodys | 6 comments »

I received this from my wife for Christmas. (Good wife huh?)It was ordered from Amazon.com and came via OnTrac in great condition.So far I am very pleased with the performance.I have crosscut and ripped several feet of Maple & Birch and I have no complaints.Very minimal burning when ripping. (It’s time to check my fence alignment too)Cross cuts in my sled were very clean.This is the best quality blade I have ever used. I should have bought one sooner.I replaced an older Freud Com...

Read this review »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com