LumberJocks

Non Compos Mentis Apprentice

  • Advertise with us
This blog is written by filiplaw | 1 entry so far

Latest Entry

Carving a small spoon

04-16-2014 04:10 PM by filiplaw | 3 comments »

I had a small piece of pine laying around and a free afternoon so I decided to carve another spoon. I wanted it to be small (somewhere between a teaspoon and a tablespoon) and simple in shape. I traced around some plastic spoon I had in my kitchen and altered the handle shape a bit. With the outline ready I went to work. I made some stop-cuts with a saw and bashed out the waste with a 20mm chisel. I also did the same to the underside since the stock was way too thick for a spoon.I find this a very quick and reliable way of getting a spoon to rough shape. You only have to be careful not to make the stop-cuts too deep. I accidentally made one right on the outlineand the mark was diffi...

Read this entry »


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com